
Description: 8.5x14 TILTBED Solid Side Single Axle
Trailer (deck 82 inches / 6'10" between fenders)
Solid Side Single Axle Tiltbed Flatbed Utility Trailer
– Standard features
12 Gauge steel sides - Full 12 gauge steel front
and side walls in standard 15” tall height and
optional 24” and 34" wall heights are available
as well.
Tiltbed tongue - When the lock pin is pulled (releasing
the trailer's bed) the back end of the trailer will
tilt down until it touches the ground. Not having
to unhook your trailer, tilt it up by manually lifting
on the tongue (we are all guilty of doing this before
the H&H tilt bed trailers were invented), and
fight with it to get it attached to your vehicle again
once it is loaded is a huge time (and back) saver.
Plus our way is a much safer!
Single spring mounted 3,500lb rated axle - No Brakes
- A 3,500lb rated axle means that you will be able
to haul 2,100lbs worth of cargo before you would exceed
your axle weight rating on this trailer.
White Spoke wheels and ST205-15C tires - White spoke
wheels give this utility trailer a stylish and modern
look and the ST205-15C tires will keep your trailer
rolling down the road.
Treated wood flooring - H&H uses #1 grade ACQ
lumber that has a lifetime rot warranty from the manufacturer.
The floor is hand fitted and pressed in place. Also
all H&H wood floor trailers also receive no less
than two or more rows of bolts (two bolts per board,
per row) to hold the floor in. NOBODY does this on
a flatbed trailer of this type but H&H. Even this
small utility trailer has 2 rows of bolts! Counting
the end caps this trailer has 50 bolts just holding
the #1 grade ACQ treated floor in place!
Full lighting, 4-prong flat trailer plug - Since
their aren't any brakes on our utility trailers they
come standard with a 4-prong, flat trailer plug to
control the taillights. The ground wire is left disconnected
on this type of trailer because it is automatically
ground when the 4-prong plug is connected to the tow
vehicle.
Safety chains - H&H installs 1/4" steel
safety chains standard on this trailer. They are long
to give you plenty play during hook-up and turning.
2,000lb rated swivel-up storage jack - The 2,000lb
swivel-up jack makes raising and lowering this trailer
a breeze. Another plus is that it can be swiveled
to lay parallel with tongue so you don't have to crank
it all of the way up before you can tow the trailer.
Plus you will be able to lower your truck's tailgate
without any problems.
2” A-Frame posi-lock coupler 5,000lb rated
- This is a standard coupler that is safe, reliable
and easy to use.
Steel fenders with rock guard on fender fronts -
Our steel fenders are built to last the life of the
trailer and the aluminum diamond plate helps protect
them from rocks and other road debris while it is
in use.
Dupont Paint - All units are finished with a Dupont
Acrylicoat© Paint System with 5 colors to choose
from!
|